SpeedyBee F745 35A BLS 25.5X25.5 AIO
SpeedyBee F745 35A BLS 25.5X25.5 AIO is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Shipping & Fufillment
Shipping & Fufillment
All items ship from our Calgary location/warehouse. For more shipping information visit our shipping policy page please note items listed as pre-order or special order will take longer to ship.
Description
Description
- SpeedyBee F745 35A BLS AIO
- Power Input 3S - 6S Lipo
- Mounting 25.5 x 25.5mm, 3mm hole diameter
- Dimension 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above
- Weight 10.1g
- FC
- MCU STM32F745
- IMU(Gyro) MPU6000
- USB Connection Need to solder a USB TYPE-C module to D+,D-,GND pads.
- Barometer BMP280
- OSD Supported
- BLE Bluetooth Supported. Used for parameter configuration
- Flash FC Firmware Wirelessly Supported
- Download/Analyze Blackbox Supported
- DJI Air Unit 6-pin Connector Built-in.
- Flash(for BlackBox) 8MB
- Current Sensor Supported. Scale=256
- BetaFlight Camera Control Pad Yes(CC pad)
- 5V Output 4 groups of 5V output. The total current load is 2.5A.
- 9V Output None
- 3.3V Output Supported. Up to 500mA current load.
- ESC Signal Pads M1 - M4
- UART Full UART * 4(UART1, UART2, UART3,UART4)
- ESC Telemetry UART None
- I2C Supported.
- LED Pad Used for WS2812 LED
- Buzzer BZ+ and BZ- pad used for 5V Buzzer
- BOOT Button Used to enter DFU mode
- RSSI Input Not supported
- SmartPort Use any TX pad of UART for the SmartPort feature.
- Supported Flight Controller BetaFlight(Default)
- Firmware Firmware Target Name SPEEDYBEE F745AIO
- ESC
- Power Input 3-6S LiPo
- Continuous Current 35A * 4
- Burst Current 45A(5S)
- ESC Protocol DSHOT300/600
- Power Output VBAT
- Current Sensor Supported(Scale=25)
We suggest you use this AIO on your 3.5" to 5" cinewhoops/long-range or lightweight quads.For quads below 3.5",
you should carefully check if your quad has enough room for this AIO.
Overview | |
Product Name | SpeedyBee F745 35A BLS AIO |
Power Input | 3S - 6S Lipo |
Mounting | 25.5 x 25.5mm, 3mm hole diameter |
Dimension | 36.5mm(L) x 36.5mm(W) x 7mm(H), recommended for quads at 3.5" or above |
Weight | 10.1g |
FC | |
MCU | STM32F745 |
IMU(Gyro) | MPU6000 |
USB Connection | Need to solder a USB TYPE-C module to D+,D-,GND pads. |
Barometer | BMP280 |
OSD | Supported |
BLE Bluetooth | Supported. Used for parameter configuration,built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip |
Flash FC Firmware Wirelessly | Supported |
Download/Analyze Blackbox | Supported |
DJI Air Unit 6-pin Connector | Built-in. |
Flash(for BlackBox) | 8MB |
Current Sensor | Supported. Scale=256 |
BetaFlight Camera Control Pad | Yes(CC pad) |
5V Output | 4 groups of 5V output. The total current load is 2.5A. |
9V Output | None |
ESC Signal Pads | M1 - M4 |
UART | Full UART * 4(UART1, UART2, UART3,UART4) |
ESC Telemetry UART | None |
I2C | Supported. |
LED Pad | Used for WS2812 LED |
Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
BOOT Button | Used to enter DFU mode |
RSSI Input | Not supported |
SmartPort | Not Supported |
Supported Flight Controller | BetaFlight(Default) |
Firmware Target Name | SPEEDYBEE F745AIO |
ESC | |
Power Input | 3-6S LiPo |
Continuous Current | 35A * 4 |
Burst Current | 45A(5seconds) |
ESC Protocol | DSHOT300/600 |
Power Output | VBAT |
Current Sensor | Supported(Sacle=256) |
Firmware | BLHeli_S JH40 |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.