Mobula8 2S Analog UART ELRS Drone
Mobula8 2S Analog UART ELRS Drone is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Shipping & Fufillment
Shipping & Fufillment
All items ship from our Calgary location/warehouse. For more shipping information visit our shipping policy page please note items listed as pre-order or special order will take longer to ship. Please note, couriers may differ in order to provide a quicker delivery.
Description
Description
This 85mm whoop from HappyModel features an F4-based flight controller, supports OpenVTX, and has a built-in ELRS receiver! This tinywhoop is an excellent option for beginners or intermediate pilots.
The item may differ from the pictures.
Package Includes:
1x Mobula8 (UART ELRS Analog)
1x OSD Board
1x Spare Set of Propellers
1x Screwdriver
Features:
- X12 Pro 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 via UART
- 400MW Max VTX output
- EX1103 KV110000 Brushless motors
- CaddxFPV Ant FPV camera
- Smooth and powerful Flight
- Compatible with 1S-2S Lipo/LIHV battery
- 3D Printed Camera Lens Protector
Specifications:
Motors
- Mode: EX1103 KV11000
- Configuration: 9N12P
- Stator Diameter: 11mm
- Stator Length: 3mm
- Shaft Diameter: Φ1.5mm
- Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
- Weight(g): 3.8g
- No. of Cells(Lipo): 1-2S
Propellers
- Weight: 0.88g
- Material: PC
- Pitch: 2.3inch
- Props Diameter: 52.17mm
- Center Thickness: 5mm
- Center Hole Diameter: 1.5mm
Flight controller
- X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4
- Sensor: ICM42688P(SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Power supply: 1-2S battery input (DC 2.9V-8.7V)
- Built-in 12A(each) Blheli_S 4in1 ESC
- Built-in Betaflight OSD(SPI Control)
- Built-in 5.8G OpenVTX 0mw~400mw (MSP control)
- Built-in UART ExpressLRS v3.0.0
- Built-in voltage meter sensor , voltage meter scale 110
- Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC
- Power supply: 1-2S LiPo/LiPo HV
- Current: 12A continuous peak 15A (3 seconds)
- Support BLHeliSuite programmable
- Firmware target: Z_H_30
- Default protocol: DSHOT300
- Support Bluejay firmware
Onboard UART ExpressLRS 2.4GHz Receiver
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V3.0
- RF Frequency: 2.4GHz
- Antenna : SMD antenna
- Telemetry output Power: <12dBm
- Receiver protocol: Serial_based CRSF
- Compatible with ExpressLRS V3.x.x TX Module
- Could flash single ELRS receiver firmware by Wifi
- ExpressLRS firmware target: Generic ESP32 2.4Ghz Rx and VTx
Onboard 5.8g OPENVTX
- Firmware version: OPENVTX
- SmartAudio v2.1
- PIT Mode support
- RCE Mode support
- Channels: 37ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
Caddx ANT 1200TVL Camera
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC or PAL
- IMAGE: 16:9 or 4:3
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio : >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 1.8mm
- Min. Illumination: 0.001Lux@F1.2
- Auto Gain Control: YES
- WDR: Global WDR
- DNR: 3D DNR
- Dimensions: 14*14mm(with bracket to 19*19mm)
- Wide Power Input: DC 3.7-18V
- Weight: 2g (N.W.)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
