Happymodel X12 ELRS Pro V1.1 AIO

This AIO is ideal for a range of tinywhoops. Featuring Onboard ELRS, you'll be ready to fly in no time with this lightweight AIO!

Package Includes:

1x X12 ELRS PRO AIO

1x Power Lead

Flight Controller Specifications:

X12 ELRS Pro v1.1 AIO 5-IN-1 Flight controller

MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4

Sensor: ICM42688P(SPI connection)

Mount hole size: 25.5mm*25.5mm

Power supply: 1-2S battery input (DC 2.9V-8.7V)

Built-in 12A(each) Blheli_S 4in1 ESC

Built-in Betaflight OSD(SPI Control)

Built-in 5.8G OpenVTX 0mw~400mw (MSP control)

Built-in UART ExpressLRS v3.0.0

Built-in voltage meter sensor , voltage meter scale 110

Built-in current meter sensor , current meter scale 470

Onboard 4in1 ESC:

Power supply: 1-2S LiPo/LiPo HV

Current: 12A continuous peak 15A (3 seconds)

Support BLHeliSuite programmable

Factory firmware: Bluejay v0.19.2

Default protocol: DSHOT300

Recommend ESC Startup power value to min1100/max1200

Onboard UART ExpressLRS 2.4GHz Receiver:

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V3.0

RF Frequency: 2.4GHz

Antenna : SMD antenna

Telemetry output Power: <12dBm

Receiver protocol: Serial_based CRSF

Compatible with ExpressLRS V3.x.x TX Module

Could flash single ELRS receiver firmware by Wifi

ExpressLRS firmware target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher)

Available from Expresslrs version 3.4.0 RC2

Onboard 5.8g OPENVTX:

Firmware version: OPENVTX

MSP VTX

PIT Mode support

Channels:40ch

Transmitting Power: 0/RCE/25mw/100mw/400mw

Power supply: DC 5V

Current (5v): <650ma (400mw)

Antenna connector: U.FL