Holybro PM08-CAN Power Module 14S, 200A

Features:

• Supports 2-14S & 200A Cont, 400A Burst
• DroneCAN Communication Protocol
• Small & Compact Design
• Two 5V Outputs with Independent BEC IC and Circuitry
• Separated Sensor and BEC Board to Minimize Electrical Noise Interference
• Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
• High Accuracy Temperature Sensor for Temperature Monitor

• High-Efficiency Aluminum Heat Dissipation Shell

• Software toggle for CAN termination resistance

Specifications:

Processor: STM32F405RG 168MHz 1024KB Flash 196KB RAM

Voltage input: 7~60.9V (2S~14S)

Continuous current:200A

Burst current

400A @ 25℃ 1 sec

1000A @ 25℃ < 1 sec

Max current sensing: 376A

Voltage accuracy: ±0.1V

Current accuracy: ±5%

Temperature accuracy:±1℃

Wire gauge: 8 AWG (high-strand silicon-insulated)

Power port output: 5.3V/3A each port

Protocol: DroneCAN

Operating temperature:-25℃~85℃

Software-Controlled CAN Termination

Firmware upgrade: Support

Calibration: Support

Interface Type:

• Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
• Battery IN/OUT Options:
  • XT90 Connectors
  • Tinned Wires
  • XT90 & Ring Terminals
    

Status LED

• Flashing quickly continuously: MCU is in the bootloader stage, waiting for the firmware to be flashed
• Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
• Flashing slowly (one-second intervals): CAN is successfully connected

Mechanical Spec

• Size: 45mm×41mm×26mm (Not Include Cable)
• Weight: 185g (Include Cable)

Info: