Skystars F7+KM65 Blheli_32 Stack

Experience superior flight performance with the Skystars F7+KM65 Blheli_32 Stack. This expertly designed stack includes a Skystars F7 flight controller and KM65 esc, providing precise control and efficient power management for your drone. Take your flying to the next level with this top-of-the-line flight stack from Skystars!

Package Includes:

1x Flight controller

1x ESC

1x XT60 with cable

1x Capacitor

1x Accessory kit

Note: Pictures may differ from actual item.

Flight Controller Specifications:

MCU: STM32F722RGT6 216MHz

Gyroscope: MPU6000

Baro:Bmp280

OSD: Betaflight SPI OSD  DJI HD OSD(UART6)

Black box: 16MB

6x Uarts: UART 1/2/3/4/5/6

4x PWM outputs

1x I2C

3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

USB Type-C(USB2.0)

1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)

1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)

VTX 10V/Vbat filtered power ON/OFF switch

DJI FPV OSD is supported by any spare UART

LED: 4 LED independent pads, support WS2812 programming lamp output.

Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.

Input voltage: 3-6S

BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI

LDO 3.3V: Max.250mA

BetaFlight firmware: SKYSTARSF722Pro

INAV firmware:SKYSTARSF722HD

Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation

External size 39mm × 39mm

Flight control weight: 6.9g

Flight control onboard voltage sensor.

ESC Specifications:

Support 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal

Excellent over-current capability.

Extreme stably support 6S LiPo battery with TVS.

Excellent heat dissipation performance

Better control performance F4 core MCU support 128K.

Input voltage: 3-6S LiPo

Con.Current: 65A

Peak Current: 90A≥ 10S

Firmware: BLHeli_32

Support : Dshot 600/1200

Mounting hole : 30.5mm/M3

BEC: No

Product size: 45.6*45*7.6mm

Weight: 19g

Info: