Skystars H7 Dual Gyro +KM60 Fly Stack 30x30

This 60 amp stack from Skystars is a excellent option for freestyle builds and large long range builds.

Package Includes:

1x H7 HD DUAL Gyro

1x KM60 60A Blheli_32 4in1 ESC

8x Silicon grommets M4 to M3

2x JST-SH1.0_8pin cable, 4cm

1x JST-GH-6P cable for DJI port, 10cm

FC Specifications:

MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash

Gyro: BMI270 DUAL

Baro: BMP280

OSD: AT7456E

Blackbox: 16M

8x Uarts (1,2,3,4,6,7,8) with built-in inversion.

8x PWM outputs

1x I2C

3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

USB Type-C(USB2.0)

2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)

1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)

Dual Camera Inputs switch

VTX 10V/Vbat filtered power ON/OFF switch

DJI FPV OSD is supported by any spare UART

KM60 BL32-60A 4IN1 3-6S ESC BLheli32 DShot1200 4-in-1 ESC Specifications:

Support Dshot1200, Dshot600, Dshot300, PWM control signal

Power supply voltage: 3-6S (12-26V)

Continuous working current: 60A

No built-in 5V BEC output

Firmware: BLHELI 32 ESC

Screw hole spacing: 30.5*30.5MM

Aperture: 4MM

Weight: 14.6g

Power:

Vbat Input: 7~25V (2~6S LiPo)

BEC: 5V 2A cont. (Max.3A)

LDO 3.3V: Max.250mA